 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Multi-rate OC-48/STM-16 SFP Transceivers with Digital Diagnostics TRPE48-E2 SM Multi-rate Product Description The TRPE48-E2 SFP series of multi-rate fiber optic transceivers with digital diagnostics monitoring functionality provide a quick and reliable interface for short reach (SR), intermediate reach (IR) and long reach (LR) applications. Diagnostics monitoring functionality (alarm and warning features) is integrated into the design via an I2C serial interface per the Multi-Source Agreement (MSA) SFF-8472, Rev. 9.4. Products under this series are compatible with SONET/ SDH standards for OC-48/STM-16 (2.488Gb/s) SR-1/I-16 short reach, IR-1/S-16.1 & IR-2/S-16.2 intermediate reach and LR-1/L-16.1 & LR-2/L-16.2 long reach applications, OC-3/STM-1 (156Mb/s) and OC-12/STM-4 (622Mb/s) SR/I-1 and I-4 short reach applications; Gigabit Ethernet LX (1.25Gb/s) applications per IEEE 802.3; and Fibre Channel 200-SM-LC-L (2.125Gb/s) and 100-SM-LC-L (1.062Gb/s) applications per FC-PI standards. The transceivers support data rates ranging from 2.67Gb/s down to 125Mb/s. All modules satisfy Class I Laser Safety requirements in accordance with the U.S. FDA/CDRH and international IEC-60825 standards. The TRPE48-E2 multi-rate transceivers connect to standard 20-pad SFP connectors for hot plug capability. This allows the system designer to make configuration changes or maintenance by simply plugging in different types of transceivers without removing the power supply from the host system. The transceivers have colored bail-type latches, which offer an easy and convenient way to release the modules. The latch is compliant with the SFP MSA. The transmitter and receiver DATA interfaces are AC-coupled internally. LV-TTL Transmitter Disable control input and Loss of Signal output interfaces are also provided. The transceivers operate from a single +3.3V power supply over operating case temperature ranges of -5C to +70C (COM), -5C to +85C (EXT) or -40C to +85C (IND). The housing is made of metal for EMI immunity. Absolute Maximum Ratings Parameter Storage Temperature "COM" Operating Case Temperature Supply Voltage Maximum Input Optical Power (30 seconds max.) Input Voltage 1 Features Operating Bit Rate of 125Mb/s to 2.67Gb/s Compatible with SONET/SDH OC-48/STM-16 Compatible with Gigabit Ethernet LX Compatible with Fibre Channel 200-SM-LC-L and 100-SM-LC-L Compatible with Gigabit Ethernet LX Compatible with Fibre Channel 200-SM-LC-L and 100-SM-LC-L Digital Diagnostics through Serial Interface Internal Calibration for Digital Diagnostics APD Receiver for Long Reach Applications Eye Safe (Class I Laser Safety) Duplex LC Optical Interface Hot-pluggable TX Fault & Loss of Signal Outputs TX Disable Input Symbol TST Minimum - 40 -5 -5 - 40 0 0 Maximum + 85 + 70 + 85 + 85 + 5.0 + 3.0 VCC Units C C V dBm V 1 "EXT" "IND" TOP VCC Pin,max VIN Measured on top side of SFP module at the front center vent hole of the cage. An Oplink Company 21737-0971, Rev.B 2009-03-31 TRPE48-E2 Single Mode Multi-rate Transmitter Performance Characteristics (Over Operating Case Temperature. VCC = 3.13 to 3.47V) Parameter Operating Data Rate Average Optical Output Power (coupled into single mode fiber), 50% duty cycle Extinction Ratio SR-1 IR-1, IR-2 LR-1, LR-2 OC-3/12/48 & 2.125Gb/s 1.25Gb/s & 1.062Gb/s SR-1, IR-1 Center Wavelength IR-2 LR-1 LR-2 Spectral Width (RMS) Spectral Width (-20dB) Side Mode Suppression Ratio Relative Intensity Noise Jitter Generation Dispersion Penalty Optical Output Eye 1 Symbol B PO Minimum 0.125 - 8.0 - 5.0 - 2.0 8.2 9.0 1 Typical 1310 1550 1310 1550 - Maximum 2.67 - 3.0 0 + 3.0 1360 1580 1335 1580 2.4 1.0 0.16 - 117 0.07 1.0 2.0 Units Gb/s dBm dB Phi /Plo 1266 C 1430 1280 1500 RMS 20 SMSR tr , tf RIN 30 ---- nm SR-1 IR-1, IR-2, LR-1, LR-2 IR-1, IR-2, LR-1, LR-2 nm nm dB ns dB/Hz UIp-p dB Optical Rise/Fall Time (20% to 80%) OC-48 IR-1, IR-2, LR-1, LR-22 JG - Compliant with Telcordia GR-253-CORE and ITU-T Recommendation G.957 Except for LR-2 which is 8.2dB minimum. 2 Specified at 1600ps/nm dispersion, which corresponds to the approximate worst-case dispersion for 80km G.652/G.654 fiber over the wavelength range of 1500-1580nm Receiver Performance Characteristics (Over Operating Case Temperature. VCC = 3.13 to 3.47V) Parameter Operating Data Rate1 Receiver Sensitivity (10-10 BER)1 Receiver Sensitivity (10-12 BER)3 Maximum Input Optical Power (10 -12 BER) SR-1, IR-1, IR-2 LR-1, LR-2 2.67Gb/s, OC-48 SR-1, IR-1, IR-2 LR-1, LR-22 Pmin Symbol B Minimum 0.125 - 19.0 - 28.0 - 23.0 Pmin - 20.0 - 23.0 - 3.0 Pmax Plos+ PlosPlos+ Plost_loss_off t_loss_on 0 - 8.0 - 35.0 - 42.0 2.3 0.54 1260 Typical Maximum 2.67 - 23.0 - 28.0 100 100 1600 - 27.0 s dB nm dB dBm dBm dBm dBm Units Gb/s OC-3/12 2.125Gb/s, 1.25Gb/s, 1.062Gb/s 0.125Gb/s SR-1 IR-1, IR-2 LR-1, LR-2 Increasing Light Input Decreasing Light Input Increasing Light Input Decreasing Light Input Increasing Light Input Decreasing Light Input LOS Thresholds LOS Timing Delay LOS Hysteresis Wavelength of Operation Receiver Reflectance 1 2 23-1 Measured with 2 PRBS. For all data rates: 2.67Gb/s, OC-48, 2.125Gb/s, 1.25Gb/s, 1.062Gb/s, OC-12, OC-3 and 0.125Gb/s. 3 Measured with 27-1 PRBS. 4 For OC-3, Minimum Hysteresis is 0.2dB. Oplink Communications, Inc. 2 21737-0971, Rev.B 2009-03-31 TRPE48-E2 Single Mode Multi-rate Transmitter Performance Characteristics (Over Operating Case Temperature. VCC = 3.13 to 3.47V) Parameter Input Voltage Swing (TD+ & TD-)1 Input HIGH Voltage (TX Disable) Input LOW Voltage (TX Disable) Output LOW Voltage (TX Fault) 1 2 Symbol VPP-DIF VIH VIL VOH VOL Minimum 0.35 2.0 0 2.0 0 Typical - Maximum 1.75 VCC 0.8 VCC + 0.3 0.8 Units V V V V V 2 2 Output HIGH Voltage (TX Fault)3 3 Differential peak-to-peak voltage. There is an internal 4.7 to 10k pull-up resistor to VccT. 3 Open collector compatible, 4.7 to 10k pull-up resistor to Vcc (Host Supply Voltage). Receiver Electrical Interface (Over Operating Case Temperature. VCC = 3.13 to 3.47V) Parameter Output Voltage Swing (RD+ & RD-)1 Output HIGH Voltage (LOS) 1 2 Symbol VPP-DIF VOH VOL Minimum 0.60 VCC - 1.3 0 Typical - Maximum 1.75 VCC + 0.3 0.5 Units V V V 2 Output LOW Voltage (LOS)2 Differential peak-to-peak voltage across external 100 load. Open collector compatible, 4.7 to 10k pull-up resistor to Vcc (Host Supply Voltage). Electrical Power Supply Characteristics (Over Operating Case Temperature. VCC = 3.13 to 3.47V) Parameter Supply Voltage Supply Current SR-1, IR-1, IR-2 LR-1, LR-2 Symbol VCC ICC Minimum 3.13 Typical 3.3 175 175 Maximum 3.47 300 320 Units V mA Module Definition MOD_DEF(0) pin 6 MOD_DEF(1) pin 5 MOD_DEF(2) pin 4 Interpretation by Host TTL LOW SCL SDA Serial module definition protocol Electrical Pad Layout 20 19 18 17 16 15 14 13 12 11 TX GND TD- (TX DATA IN-) TD+ (TX DATA IN+) TX GND VccTX VccRX RX GND RD+ (RX DATA OUT+) RD- (RX DATA OUT-) RX GND Host Board Connector Pad Layout 20 19 18 17 16 15 14 13 12 11 Toward ASIC 1 2 3 4 5 6 7 8 9 10 TX GND TX Fault TX Disable MOD_DEF(2) MOD_DEF(1) MOD_DEF(0) NO CONNECTION LOS RX GND RX GND 1 2 3 Toward Bezel 4 5 6 7 8 9 10 Top of Board Bottom of Board (as viewed thru top of board) Oplink Communications, Inc. 3 21737-0971, Rev.B 2009-03-31 TRPE48-E2 Single Mode Multi-rate Example of SFP host board schematic Vcc 3.3V 1 H coil or ferrite bead (<0.2 series resistance) Vcc 3.3V + 10 0.1 0.1 16 15 RRR 2 8 4 5 6 50 line 13 50 line 12 R R TX Fault LOS MOD_DEF(2) MOD_DEF(1) MOD_DEF(0) RX DATA OUT+ to 50 load RX DATA OUTto 50 load + 10 0.1 TRPE48-E2 TX Disable TX DATA IN+ TX DATA IN50 line 50 line 3 18 19 1, 9,10,11,14,17,20 R: 4.7 to 10k CAP Values in F Application Notes Electrical interface: All signal interfaces are compliant with the SFP MSA specification. The high speed DATA interface is differential AC-coupled internally with 1F and can be directly connected to a 3.3V SERDES IC. All low speed control and sense output signals are open collector TTL compatible and should be pulled up with a 4.7 - 10k resistor on the host board Loss of Signal (LOS): The Loss of Signal circuit monitors the level of the incoming optical signal and generates a logic HIGH when an insufficient photocurrent is produced. TX_Fault: The output indicates LOW when the transmitter is operating normally, and HIGH with a laser fault including laser end-of-life. TX Fault is an open collector/drain output and should be pulled up with a 4.7 - 10k resistor on the host board. TX Fault is non-latching (automatically deasserts when fault goes away). TX_Disable: When the TX Disable pin is at logic HIGH, the transmitter optical output is disabled (less than -45dBm). Serial Identification and Monitoring: The module definition of SFP is indicated by the three module definition pins, MOD_DEF(0), MOD_DEF(1) and MOD_DEF(2). Laser Safety: All transceivers are Class I Laser products per FDA/CDRH and IEC-60825 standards. They must be operated under specified operating conditions. Upon power up, MOD_DEF(1:2) appear as NC (no connection), and MOD_DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol (standard two-wire I2C serial interface) and generates the serial clock signal (SCL). The positive edge clocks data into the EEPROM segments of the SFP that are not write protected, and the negative edge clocks data from the SFP. The serial data signal (SDA) is for serial data transfer. The host uses SDA in conjunction with SCL to mark the startand end of serial protocol activation. The supported monitoring functions are internal temperature, supply voltage, bias current, transmitter power, average receiver signal, all alarms and warnings and software monitoring of TX Fault/LOS. The device is internally calibrated. The data transfer protocol and the details of the mandatory and vendor specific data structures are defined in the SFP MSA, and SFF-8472, Rev. 9.4. Power supply and grounding: The power supply line should be well-filtered. All 0.1F power supply bypass capacitors should be as close to the transceiver module as possible. Oplink Communications, Inc. DATE OF MANUFACTURE: MANUFACTURED IN THE USA This product complies with 21 CFR 1040.10 and 1040.11 Meets Class I Laser Safety Requirements Oplink Communications, Inc. 4 21737-0971, Rev.B 2009-03-31 TRPE48E2 Single Mode Multi-rate Package Outline 41.80 [1.646] 14.94 [.588] 45.00 [1.772] 6.25 [.246] 1.99 [.078] [.257] 6.54 0.60 [.024] [.470] 11.94 [.362] 9.20 10.45 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com * www.oplink.com 2.29 13.80 [.543] [.090] 1.49 [.059] [.411] 2.50 [.098] 0.60 [.024] 0.45 [.018] Dimensions in inches [mm] Default tolerances: .xxx = .005", .xx = .01" Ordering Information Part Number Operating Temperature Latch Color Nominal Wavelength SONET/SDH Standards Distance1 TRPE48CS1C000E2 TRPE48EI1C000E2 TRPE48EI2C000E2 TRPE48HL1C000E2 TRPE48HL2C000E2 TRPE48CS1E000E2 TRPE48EI1E000E2 TRPE48EI2E000E2 TRPE48HL1E000E2 TRPE48HL2E000E2 TRPE48CS1I000E2 TRPE48EI1I000E2 TRPE48EI2I000E2 TRPE48HL1I000E2 TRPE48HL2I000E2 1 - 5C to +70C - 5C to +70C - 5C to +70C - 5C to +70C - 5C to +70C - 5C to +85C - 5C to +85C - 5C to +85C - 5C to +85C - 5C to +85C - 40C to +85C - 40C to +85C - 40C to +85C - 40C to +85C - 40C to +85C Gray Violet Red Red White Gray Yellow Red Red White Gray Yellow Red Red White 1310nm FP 1310nm DFB 1550nm DFB 1310nm DFB 1550nm DFB 1310nm FP 1310nm DFB 1550nm DFB 1310nm DFB 1550nm DFB 1310nm FP 1310nm DFB 1550nm DFB 1310nm DFB 1550nm DFB SR-1/I-16 IR-1/S-16.1 IR-2/S-16.2 LR-1/L-16.1 LR-2/L-16.2 SR-1/I-16 IR-1/S-16.1 IR-2/S-16.2 LR-1/L-16.1 LR-2/L-16.2 SR-1/I-16 IR-1/S-16.1 IR-2/S-16.2 LR-1/L-16.1 LR-2/L-16.2 12/2km 21/15km 42/15km 40km 80km 12/2km 21/15km 42/15km 40km 80km 12/2km 21/15km 42/15km 40km 80km These are target distances to be used for classification and not for specification, per Telcordia GR-253-CORE/ITU-T Recommendation G.957. Oplink Communications, Inc. reserves the right to make changes in equipment design or specifications without notice. Information supplied by Oplink Communications, Inc. is believed to be accurate and reliable. However, no responsibility is assumed by Oplink Communications, Inc. for its use nor for any infringements of third parties, which may result from its use. No license is granted by implication or otherwise under any patent right of Oplink Communications, Inc. (c) 2009, Oplink Communications, Inc. 5 21737-0971, Rev.B 2009-03-31 [.333] 8.46 13.62 [.536] |
Price & Availability of TRPE48CS1C000E2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |